Posted by Peter on August 17, 2003 at 06:02:06:
I have a Sansui AU-G90X amplifier and everything was OK. When I turned it ON some days ago, I found out that left channel was gone. I thought at first that it was a speaker but I checked both speakers, switched them, and cabels back and forth. Both speakers work OK on both on "A" and "B". I checked the current adjustment back on the Amplifier and it is set on 220V, and speakers IMPEDANCE to the recomended 4-16ohm. I checked it inside and nothing seems to be burned or disconected. I vacumed the dust but it doesn't work. The right channel is OK.
When I play music and srew the BALANCE knob to the left channel, all I can hear is disturbance. So there is noise but only "rippin". When I turn more volume the strange thing happens, and the Amplifier turns itself OFF.
This model as I'm sure many others has something called POWER PROTECTOR INDICATOR. It winks before several seconds before is set to fully operational modus.
IS THERE SOMEBODY THERE WHO RECOGNIZE THE PROBLEM AND CAN OFFER SOME HELP?
THANK'S A LOT IF SO.
Post a Followup