Text Box: Looking for Sansui Brochures, Bulletins, or Manuals (schematics included)?  Or, need NOS parts?  Visit OBS, Inc, Woodang.net, or back to the Best of Sansui

 

 

Re: AU-717 left channel preamp dead


[ Follow Ups ] [ Post Followup ] [ BBS_General ] [ FAQ ]

Posted by Brian hahn on March 01, 2005 at 05:30:00:

In Reply to: AU-717 left channel preamp dead posted by Steven M Blumenfeld on May 14, 2004 at 23:59:13:

: I need some help. After many years of faithful use my AU-717 has gone on the fritz. The left channel preamp output is dead.

: 1) Amp section is fine
: 2) Switches on front panel are all working fine - R/L audio out of F-2720 board ok
: 3) coupling switch on back is working - i am getting continuity on both sides of the switch when in the connected position
: 4) power protection relay makes good contact on both right and left

: so here is the problem the left channel seems to be dead. There is a VERY little audio if i crank it up. Intermittantly If i leave it on for an hour plus it will pop - then power protect off -Then come back on and then the left channel works.

: i dont have a schematic but it seems the problem is on the F-2663 board

: Anybody have a clue what i should look for - the 2663 board is a bear to pull out

: thanks

: steven


I have the same problem but un-like you I did tear into it :S

lol I have a manual coming soon I will give you a copy of what you need

I am not sure why or what is wrong did a good cleaning and inspectionof what you had done

anyone know where you can get a 2663 @ >>?? thanks Brian


Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL:


[ Follow Ups ] [ Post Followup ] [ BBS_General ] [ FAQ ]