Now, your E-Mail address is required to leave your message. Your E-Mail address could be traceable by the Web Master in the even of virus, spy ware, obscene messages attacks.
Looking for Sansui Brochures, Bulletins, or Manuals (manuals include schematics)? Or, need NOS parts? Visit OBS, Inc Site, Woodang.net Site, or Go back to the Best of Sansui
Posted by andy anon on November 23, 2004 at 02:11:14:
In Reply to: Re: Au 217 II amp and pc connection posted by andy anon on November 23, 2004 at 01:39:44:
: : Hi Andy
: : First of all. Your amp do have a Tape Monitor Switch located at the right of Loudness Switch. When ON the source connected to TAPE IN at the rear is going to your Speaker Output. Connect your soundcard output to TAPE IN and connect your soundcard input to TAPE REC. Connect your CD Player to AUX. It should work.
: : : I am trying to connect my soundcard from my pc to the amp so that I can play music on the pc and listen via my HI Fi speaker. I would also like to be able to record from the tuner to the pc.
: : : I have obtained two mini jack to two phono leads and have connected the input and output from the sound card to the tape connections on the pc. I have no tape deck
: : : I use the aux/tape control on the front of the amp to connect to my cd player. I have no tape control on the front of the amp, despite having a tape connection on the back.
: : : At the moment I can't make the link between the pc and the amp. Can anyone advise
: : : I have an amp, a tuner, a record deck, and a cd player connected. The only spare connectios are to the tape. But remember, I have no tape control on the front, only tape/aux which I use for my CD player
: : : Thanks
: : : A
: Thanks for the response,
: Yes, I do have a tape monitor switch. But when I switched it on I still did not get any output.
: From the soundcard - The output is connected to tape (play). The input(from pc) to tape (rec).
: I didn't understand the tape in (rear) to speaker output that you mention.
: I have a set of connectors on the back of the amp that produce output to the speakers.
: I presume that when I use tape monitor that this overrides the control knob on the front of the amp to aux and phono, etc.
: The hi fi system works well with the tuner and cdplayer.
: Any idea what I need to do to get output from my pc to play through the hi fi speakers. And for my pc to be able to record from the tuner and cddrive
: thanks
: A
One thing I forgot to mention.
The connection cables on the back of my amp are colour coded red and white.
But the cables that I bought from a hi fi shop to connect my pc to my amp are colour coded red and black. I have put the red in the usual lower position and the black at the top.
Should this be alright.
A
PS. what is the significance of the red, white, black colours