Posted by k.tepe talip on May 08, 2003 at 14:55:40:
Specifications:
input sensitivity and impedance (1kHz)
SOURCE IN, TAPE PLAY .....150 mV/47kilohms
(Max. input capability;8V,20Hz to 20 kHz)
MIC.......0.5mV/10kilohms
(Max. input capability;25mV,100Hz to 15 kHz)
GUITAR.... 5mV/100 kiohms
output level and impedance (1kHz)
TAPE REC .......150 mV/1kilohms
PREAMP OUT......150 mV/1kilohms
T:H:D:(1V,20Hz to 20 khz)
SOURCE IN TAPE PLAY........0.05%
frequency response (0.5 V)
SOURCE IN TAPE PLAY........20 Hz to 20 kHz
...........................+0dB,-0.5dB
signal to noise ratio (short-circuit,A-network)
SOURCE IN TAPE PLAY........75dB
Channel seperation (1kHz)
SOURCE IN TAPE PLAY........70dB
Echo time..................0-3 sec. (-60dB)
Duet time..................25 msec. and 50 msec.
Echo method................ cristal echo maker