Now, your E-Mail address is required to leave your message. Your E-Mail address could be traceable by the Web Master in the even of virus, spy ware, obscene messages attacks.
Looking for Sansui Brochures, Bulletins, or Manuals (manuals include schematics)? Or, need NOS parts? Visit OBS, Inc Site, Woodang.net Site, or Go back to the Best of Sansui
Posted by Sten on November 06, 2004 at 05:42:59:
In Reply to: Re: Sasui 9090DB dolby switch wanted posted by Carlos Maurício Borgonovi Garcia Tejeda on November 06, 2004 at 04:06:49:
There is a 9090DB parting out if you go to the site by clicking on the link below. Scroll down when you are there and you will find several Sansui for parting out. However, I find their prices to be very high
: Thank you for your advise! I'll try to do that, but the Dolby selector was disassembled twice now, and I thinkh the contacts are becoming loose, causing a hard time yo me cause i have one channel only... Do you think that's is still possible to find a Dolby selector to replace mine? I Also need a power switch to replace too!
: I[m from Brazil and is very difficult here to find those vintage parts.
: Thank you again
: : Hi Carlos
: : Have you tried to clean the switch with a good De-Oxide spray ?
: : : I have an old Sansui 9090DB and its only problem is with dolby switch selector that causes one of the channels going off, and I have to get it back to mono mode to have the two channels on ...
: : : I had tried to fix it many many times, but the eletrical contact problem always reappears. Could anybody have any idea what´s going on? Do I have to replace the DOLBY switch or it could be something else, tha cause that problem?
: : : Thank you all
Post a Followup