Posted by Bryan B. on February 23, 2004 at 17:58:04:
In Reply to: sansui 9090 panel lights posted by ron manning on February 12, 2004 at 08:43:16:
: i have no panel lights!!!!!!!! help!!!!!!
>>Check 6.3v circuit for panel lights(Originates from small horizontal circuit board, behind left side of frontcover when facing unit.) Chances are you have no output from this board(check red wire that runs between this board and vertical panel light circuit board). If this is your problem, then your options are 1) replace board 2) repair board 3) jump panel lights from secondary 6.3v circuit(feeds lamps in VU meters). If you have no voltage to ANY lamps, including VU meter lamps, then you probably have a power supply problem.
B